Filter
Top Products
03
5
En
Connecting up
English
Nederlands
Italiano
Español
Français
Deutsch
Chapter 3
Connecting up
Connecting to your Pioneer
AV receiver
Connect this unit to a Pioneer AV
receiver with a dedicated iPod control
cable terminal (such as the VSX-84TXSi
or VSX-AX4ASi (model name depends
on region)). You will be able to use the
remote control supplied with the
receiver to control this unit.
Caution
• Before connecting or
disconnecting this unit from your
AV receiver, make sure the power
to the AV receiver is switched off.
1 Connect the terminal on this unit
to the dedicated iPod terminal on the
receiver.
Use the iPod control cable supplied
with the AV receiver. Connect both ends
as shown below (make sure the
mark on the connector is facing
upwards).
2 Place the iPod in the connector
port.
3 Plug in and switch on your AV
receiver.
Please refer to the manual supplied
with the receiver for detailed
instructions on operating the iPod
using the iPod control cable.
This unit
iPod control
cable (supplied
with your
Pioneer AV
receiver)
MENU
iPod
MENU
iPod
Music >
Extras >
Settings >
Shuffle Songs
Backlight
IN
Pioneer AV receiver with a
dedicated terminal for an
iPod control cable
IDK-80_02_connect_up.fm 5 ページ ２００６年５月１９日 金曜日 午後６時１０分