Filter
Top Products
28
2 Ensure that the Music Station is turned on.
3 Press HOME.
4 Select [Settings] > [Time] > [Auto time
sync].
5 Press to select, then press .
6 To return to the Home menu, press
HOME.
Synchronize with NTP
1 Ensure that the Music Station is turned on.
2 Press HOME.
3 Select [Settings] > [Time] > [Auto time
sync].
4 Press to select, then press .
5 To return to the Home menu, press
HOME.
Set standby timer
You can select a set time period after which the
Music Station automatically switches to standby.
The timer offers the following options:
[15]
[30]
[45]
[60]
[90]
[120] minutes
[Off]
1 Ensure that the Music Station is turned on.
2 Press SLEEP one or more times to select a
time period.
When you set the timer, the display
shows the sleep icon:
To view the remaining countdown time
to standby, press SLEEP anytime.
•
•
•
•
•
•
•
»
»
8 To return to the Home menu, press
HOME.
Tip
If you switch the Music Station to eco standby, the
alarm is deactivated.
•
Set the alarm repeat
1 Ensure to set the alarm time (see ‘Set the
alarm time’ on page 27) before you set the
alarm occurrence.
2 Ensure that the Music Station is turned on.
3 Press HOME.
4 Select [Settings] > [Alarm] > [Alarm
time] > [Repeat].
5 Press to select
[Once]
[Daily]
6 Press to conrm.
7 To return to the Home menu, press
HOME.
Automatic time update
You can synchronize the current clock time
with a
radio station that is RDS (Radio Data
System) (see ‘Synchronize with RDS’ on
page 28) enabled.
computer that is NTP (Network Time
Protocol) (see ‘Synchronize with NTP’ on
page 28) enabled.
Synchronize with RDS
RDS (Radio Data System) is a service
that allows FM stations to send additional
information along with the FM radio signal.
Automatic time synchronization is one of the
RDS features.
1 Ensure that the radio station you select for
synchronization has RDS.
•
•
•
•
EN
was6050_ifu_01en_04de_03es_02fr_28 28 2008-02-14 12:40:42 PM