Filter
Top Products
13
Activate and deactivate the alarm
timer
1 Press AL 1 or AL 2 repeatedly to activate
or deactivate the timer.
If the timer is activated, [ » AL 1] or
[ AL2] is displayed.
If the timer is deactivated, » before
[AL1] or [AL2] disappears.
Gentle wake
Gentle wake function peacefully wakes you
with gently ascending alarm volume.
If selected the alarm source iPhone/iPod, •
iPhone/iPod playlist or FM, alarm volume
will gentle increase.
If selected the alarm source Buzzer, the •
alarm will increases beep tone frequency
within seconds.
Repeat alarm
1 When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes later. »
Tip
You can press • / to adjust the interval to
repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding AL 1 or AL 2.
The alarm stops but the alarm settings »
remain.
View the alarm settings
1 Press AL 1 or AL 2.
6 Other features
Set the alarm timer
You can set two alarms which go off at different
time.
1 Ensure that you have set the clock
correctly.
2 Press and hold AL 1 or AL 2 for 2
seconds.
[AL 1] or [AL 2] begin to blink. »
3 Press SOURCE repeatedly to select an
alarm sound source: iPod/iPhone, iPod/
iPhone playlist, FM tuner, or buzzer.
4 Press AL 1 or AL 2.
Hour digits begin to blink. »
5 Press TUNING +/- or / repeatedly
to set the hour.
6 Press AL 1 or AL 2toconrm.
Minute digits begin to blink. »
7 Repeat steps 5-6 to set the minute.
8 Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
9 Repeat steps 5-6 to set the alarm volume.
Tip
Ifyouwanttowakeuptospecicmusic •
track(s) on iPhone/iPod, after set iPhone/iPod
playlist as the wake up source on the unit,
you need to create a playlist called ‘PHILIPS’
via iTunes and copy the track(s) to this new
‘PHILIPS’ playlist.
If no playlist is created or there is no song •
in the playlist, the unit will play the music
track according to the last music playback
preference on iPhone/iPod.
English
EN
DC220_93_UM_V1.0.indb 13 2010-4-9 9:43:25