Philips SBT10 Portable Speaker User Manual


 
5EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Charge the built-in battery
The speaker is powered by a built-in
rechargeable battery.
Note
Before use, fully charge the built-in battery.
Connect the USB cable between
• the DC 5V socket on the speaker, and
• a USB socket of a computer.
Charging indicator
The indicator on the bottom indicates the
battery status during charging.
Indicator Battery
Solid
green
Under charging
Off Fully charged
Power on/off
Press and hold for 2 seconds.
Note
If an audio input cable is connected to the AUX socket,
this product does not automatically power off. To save
battery power, disconnect the audio input cable or
manually power off the product after use.
In Bluetooth mode, if Bluetooth connection is invalid for
15 minutes, this product automatically powers off.