Philips HDD085 MP3 Player User Manual


 
2
Battery level indication
You can see the approximate power level of your batteries on the display.
Battery full
Battery two-thirds full
Battery half full
Battery low
Battery empty
Connect and Charge
Connect the included multi-voltage adaptor / charger into the jack marked 5V DC, and then plug the
multi-voltage adaptor / charger into a standard AC outlet.
Please charge for 4 hours for 100% battery power for first time use or fast charge 70% in 1 hour.
The device is fully charged when the charging animation stops and the icon shows.
TIP
You can also charge your device during USB connection. Please connect your device to
your computer using the included USB cable.
Enjoy
Powering on / off
Power on: Press and hold 2; until the splash screen lights up.
PHILIPS splash screen appears briefly
Power off: Press and hold 2; again until the device shuts down.
TIP
Your device automatically powers down if there is no operation and no music played for
10 minutes. Last playback status / screen will be resumed at next powering on.
TIP
When the batteries are nearly empty,the battery low screen blinks.
Your device will save all settings and un-finished recordings before it powers down.
hdd085_ENG.qxd 4/10/05 15:15 Page 2