Filter
Top Products
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
VIDEOHEADPHONEPLAYRECORD
STOPTUNERVCRDVDSOURCE
STANDBY-ON
TIMER
REC
IR
AUDIO
JAZZ
STOP/EJECT
POP
SURR
CLASSIC
OPTIMAL
VOL
OPEN
CLOSE
PLAY
AV IN
SUPER VIDEO
STANDBY-ON
PLAY
VCRDVD
OK
MENU
TUNER
CLEAR
REC
PROG
DISPLAY/STATUS/EXIT
SKIP/
P
-
SKIP/
P
+
DISC/VCR
PAUSE
REW FF
STOP
SLOW
SV / V+
TITLE
ANGLE
RETURNMODE/SYSTEM
REPEATREPEAT
VOLUMESOUNDSURROUND
ZOOM
TIMER SET
SUBTITLE
SYSTEM
MENU
AUDIO/
BAND
SEARCH/INDEX
+10
0
123
6
5
4
789
A-B
4
1
3
5
2
Make sure your DVD system and
TV are connected and turned on!
continue...
Playing a disc
1 Press STANDBY ON
22
22
2 on the front of the System or its remote to turn on
the power.
2 Turn on your TV. Select the correct Video In channel (AV1, VIDEO, etc.) at the TV. Your
TV remote may have a VIDEO button that selects the Video In channel. If not, go to your
lowest TV channel (1 or 2). Then press the Channel down button on your TV
until you see the DVD screen on the TV (if no Disc is in the System).
3 Press OPEN•CLOSE 0 at the front of the DVD system, load a disc in the tray
with the disc label is facing up. For double-sided discs, load the side you want to play face
up. Press OPEN•CLOSE 0 again to close the disc tray.
4 Playback will start automatically, if not press PLAY B.
If a disc menu appears, use 3 4 1 2 and OK buttons on the remote (or the Number
buttons) to select features or start play from the menu. Follow the instructions in the Disc
menu. See the Owner’s Manual for more Disc features.
5 To stop playing the Disc, press the STOP 9 button.
Region Codes
DVDs must be
labeled for ALL
regions or for
Region 1 in order
to play on this
DVD system.
ALL
1
TT
TT
T
No picture!!
Check the AV (Audio/Video) mode on your TV.
* Usually this channel is between the lowest and highest channels and may be called FRONT,
A/V IN, or VIDEO.
*Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until
you see the Video In channel.
*Or, your TV remote control may have a button or switch that chooses different video modes.
* Do not use channel 3 or 4 on the TV unless you are using an RF modulator.
* See your TV manual for more details.
Helpful Hints
If a DVD does not play properly,
please contact Philips at 1-800-531-
0039 for assistance. Due to the
inconsistency of disc formats provided
by various disc manufacturers, your
DVD system may require a playability
enhancement or upgrade. As DVD
technology advances, these
enhancements will become common
and will be easy to complete.
DVD Mode
Before using the
remote control for
DVD features,
press the DVD
button on the
remote. The
System must be in
DVD mode. The
DVD light will
appear on the front
of the System.
1 Turn on the TV and select the correct Video In
mode.
2 Press STANDBY-ON
22
22
2 to turn on the DVD
system, then press VCR.
3 Press 3 or 4 to select the desired language for
DVD system displays. Then press B.
4 Press P+ to start the automatic tuning process. The TV station stored
may vary according to the area you live in.
Setting Up the DVD system for the
First Time
Note: After setting the AUTO TUNING process, the DVD system will memorises
all the active channels even after you unplug the AC plug or power failure.
LANGUAGE SELECT
ENGLISH
FRANÇAIS
ESPANOL
01-MX51-37 QUG-Eng1 6/04/2004, 3:52 PM2