Filter
Top Products
FEATURES
18
Use the AY 3764 cord remote control. The buttons on the remote control have the
same functions as the corresponding buttons on the CD player.
1 If necessary press 9 once or twice until the unit is switched off.
2 Firmly connect the remote control to LINE OUT/p and the headphones to the
remote control’s jack.
3 Turn the volume down with VOL F on the remote control and set VOL E on
the CD player to position 8.
You can connect your CD player to digital equipment (e.g. a CD recorder) with a
DIGITAL OPTICAL IN/AUX jack.
1 Use the power adapter, switch off ESP and turn down the volume of the appliance
that should be connected.
2 Connect an optical cable or signal lead to the OPT OUT jack of your CD player and
to the DIGITAL OPTICAL IN/AUX jack of the other appliance.
• To adjust volume and sound, use the controls of the connected appliance.
Notes: – For analog connections use the LINE OUT/p jack.
– Playback via OPT OUT does not work if the player is powered by batteries.
Optical out (not on all versions)
Remote control (not on all versions)
English