Philips PET941D/79 Portable DVD Player User Manual


 
14
Install remote control battery
Caution
Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard
batteries in re.
Risk of decreased battery life! Never mix different brands or types of batteries.
Risk of product damage! When the remote control is not used for long periods, remove
the batteries.
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
For rst-time use:
1
Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Connect additional equipment
Caution
Turn off your player before connecting to any additional equipment.
You can connect the player to a TV or an ampli er to enjoy DVDs or
Karaoke.
Match the color of the AV cables (the AV cable connected to TV is not
supplied) with the jacks: the yellow cable is for the yellow video jack, the red/
white cable is for the red/white audio jacks.
EN
PET941D_79_V1.0.indd Sec1:14PET941D_79_V1.0.indd Sec1:14 4/22/2009 9:17:10 AM4/22/2009 9:17:10 AM