Filter
Top Products
19
English
TROUBLESHOOTING
If it appears that the DVD-Video player is faulty, first consult this checklist.
It may be that something has been overlooked.
WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the set for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service centre.
Symptom Remedy
No power – Check if both plugs of the mains cord are
properly connected.
– Check if there is power at the AC outlet by
plugging in another appliance.
– Check if the built-in battery is drained.
– Check if car adaptor is connected appropriately.
Distorted picture – Check the disc for fingerprints and clean with
a soft cloth, wiping from centre to edge.
– Sometimes a small amount of picture distor-
tion may appear. This is not a malfunction.
Completely distorted – The PAL setting may be in the wrong
picture / no colour in status. Match your TV’s setting with
the TV screen the player’s setting.
No sound – Check audio connections. If using a HiFi
amplifier, try another sound source.
ANALOG TV
To store a preset channel number
1 In the TV menu, when CHANNEL NO is highlighted, use 1, 2 to preset a
channel number.
2 To store the channel number, select STORE, then press OK on the remote
(2
;
on the set) to confirm.
➜ “OK” appears, and the preset number is stored.
P001-021_PET737_58_Eng 2008.11.10 16:17 Page 19