Philips PD7008/51 Portable DVD Player User Manual


 
24
Frequency response 20Hz-20KHz ± 3dB
Signal/noise ratio
80 dB
Audio distortion + noise
-80 (1KHz)
Channel separation
80 dB
Dynamic range
80 dB
Audio out (analog audio) Output level: 2V ± 10%
Load impedance
10 K
Video out Output level: 1Vp - p ± 20%
Load impedance
75
8 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of the player.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using the player, check the following points
before requesting service. If the problem remains unsolved, register your
player and get support at www.philips.com/welcome.
No power
Ensure that both plugs of the mains cord are properly connected.
Ensure that there is power at the AC outlet.
Check if the built-in battery is drained.
No sound
Ensure that the AV cable is connected correctly.
No response to the remote control
Ensure that the path between the remote control and the player is
clear from obstacles.
From a close distance, point the remote control directly at the player.
Replace the remote control batteries.
EN