Filter
Top Products
WARNING
Under no circumstances should you try to repair the set yourself as
this will invalidate the guarantee.
If a fault occurs,first check the points listed, before taking the set for
repair.If you are unable to solve a problem by following these hints,
consult your dealer or service centre.
Problem Solution
No power,playback – Insert the batteries correctly.
does not start – Replace the batteries.
– Connect the mains adapter securely.
HoLd indication – Deactivate HOLD.
and/or no reaction – Disconnect the set from the power supply
to controls or take out the batteries for a few seconds.
No sound or – Press 2; to resume playback.
bad sound quality – Adjust the volume.
– Check and clean the connections.
– Keep this set away from active mobile
phones or strong magnetic fields.
no cd indication – Insert a disc, label upwards.
– Clean or replace the disc.
– Wait until the steamed up lens has cleared.
nF dISC indication – Make sure the inserted CDR(W) is
finalized.
26
Troubleshooting
English