Filter
Top Products
FEATURES
17
You can store the last position played. When restarting,
playback continues from where you have stopped,
according to CD Audio or MP3 playback.
1 Switch the slider to RESUME during playback to
activate RESUME.
y RESUME is shown.
2 Press 9 whenever you want to stop playback.
3 Press 2 whenever you want to resume playback.
y RESUME is shown and playback continues from
where you have stopped (CD Audio), or from the
last track played (MP3).
• To deactivate RESUME, switch the slider to OFF.
y RESUME goes off.
You can lock the buttons of the set. When a key is
pressed, no action will be executed then.
1 Switch the slider to HOLD to activate HOLD.
y All buttons are locked. HoLd is displayed by
pressing any key. If the set is switched off,
HoLd is displayed only by pressing 2 and 9.
2 To deactivate HOLD, switch the slider to OFF.
Note: When you deactivate HOLD by switching the
slider to RESUME and restart, playback continues
from where you have stopped (CD Audio), or from
the last track played (MP3).
O
OFF/RESUME/HOLD
Locking all buttons – HOLD
RESUME
O
OFF/RESUME/HOLD
Storing the last position played – RESUME
English
FEATURES
16
You can select up to 30 tracks and store them in the
memory in a desired sequence. You can store any track
more than once.
1 While playback is stopped, select a track with 5 or
6 .
2 Press PROGRAM to store the track.
y PROGRAM lights up, the track number
programmed and P with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press 2 to start playback of your selected tracks.
y PROGRAM is shown and playback starts.
• You can review the program by pressing PROGRAM for more than 2 seconds.
y The display shows all stored tracks in sequence.
Notes: – If you press PROGRAM and there is no track selected,
SELECt
is
displayed.
– If you try to store more than 30 tracks,
FULL
is displayed.
Erasing the program
1 If necessary, press 9 to stop playback.
2 Press 9 to erase the program.
y CLEAr is displayed once, PROGRAM goes off
and the program is erased.
Notes: The program will also be erased if you
– interrupt the power supply,
– open the CD lid, or
– the set is switched off automatically.
PROGRAM
PROGRAM
PROGRAM
PROGRAM
Programming track numbers
English
EXP101/01 eng 6/14/00 4:10 PM Page 16