Filter
Top Products
CONTROLS
Remote control AY3802 ( see figure 2)
1 p........................3.5 mm headphone jack
2 VOL
+
/
-
............adjusts the volume
3 MODE................selects playback options. To select and enter the display
function, press and hold MODE for 3 seconds.
4 PROG.................programs tracks and reviews the program
5 DBB...................switches the bass enhancement on and off. When pressed
for more than 2 seconds, the button switches audible
feedback (beep) on/off.
6 ESP ...................selects between the battery powersave mode and
Electronic Skip Protection (ESP). ESP prevents playback
interruptions caused by shocks.
7 .. .........................clip
8 2;......................switches the player on, starts or pauses CD playback.
9
........................stops CD playback, clears a program or
switches the player off.
9 OFF ....................switches HOLD off (on the remote control only)
HOLD ................locks all buttons (on the remote control only)
0 ALBUM
+/ -.....MP3/WMA-CD only: selects the previous or next album
! SEARCH ∞ / §..skips and searches backward/ forward tracks
@ ...........................display
Charge cradle AY4105 ( see figure 3, for some versions only)
1 Docking pins..... connects to the docking jacks on your CDplayer
2 Charging indicator ..... lights up red/green for charging on/standby
3 4.5V DC.................. jack for AC/DC adapter power supply
English
CONTROLS
Supplied Accessories:
1 x headphones HE250
1 x remote control, AY3802
1 x AA battery door
1 x AC/DC adapter, AY3162 (for some versions only)
1 x charge cradle, AY4105 (for some versions only)
2 x rechargeable batteries AY3363 (for some versions only)
Controls ( see figure 1)
1 4.5V DC............... jack for AC/DC adapter power supply
2 ESP ..................... selects between the battery powersave mode and
Electronic Skip Protection (ESP). ESP prevents playback
interruptions caused by shocks.
3 DBB .................... switches the bass enhancement on/off. When pressed for
more than 2 seconds, the button switches audible
feedback (beep) on/off.
4 VOLUME
+
,
-
...... adjusts the volume
5 ............................. typeplate
6 Docking jack..... connects to the docking pins on your AY4105 charge
cradle (for some versions only)
7
9
.......................... stops playback/ clears programmed tracks
/ switches off the set.
8 SEARCH ∞ / §...skips and searches backward/ forward tracks.
9 ALBUM +/ -..........MP3/WMA- CD only: selects the next/previous
album or skips forward/backward tracks.
0 2;........................ switches the player on, starts or pauses CD playback.
! ç........................ opens the CD lid
@ OFF .......................switches RESUME and HOLD off (on the set only)
RESUME .............saves the last position played
HOLD ...................locks all buttons (on the set only)
# p ......................... connect the remote control here and your headphones to
the remote control
$ .............................battery door
CD PLAYER AND CD HANDLING
• Do not touch the lens A of the CD player.
• Do not expose the unit, batteries or CDs to humidity,
rain, sand or excessive heat (caused by heating
equipment or direct sunlight).
•You can clean the CD player with a soft, slightly
dampened, lint-free cloth. Do not use any cleaning agents as they may have a
corrosive effect.
•To clean the CD, wipe it in a straight line from the center toward the edge
using a soft, lint-free cloth. A cleaning agent may damage the disc! Never
write on a CD or attach a sticker to it.
• The lens may cloud over when the unit is moved suddenly from cold to warm
surroundings. Playing a CD is not possible then. Leave the CD player in a
warm environment until the moisture has evaporated.
• Active mobile phones in the vicinity of the CD player may cause malfunctions.
•Avoid dropping the unit as this may cause damage.
REMOTE CONTROL AY3802 / HEADPHONE HE 250
Using the remote control
The remote control allows you to command all the
functions on the player.
1 Firmly connect the remote control to
LINE OUT p on the set.
2 Firmly connect the headphones to the jack p
on the remote control.
3 On the remote control, press 2; to start playback.
4 Adjust the volume and sound on your remote control.
5 To stop playback, press
9
.
6 To switch off the CD player, press
9
again.
Headphones HE250, LINE OUT
• Connect the remote control to LINE OUT pjack of
the player and your headphones to the remote control.
• p can also be used for connecting the player to your
HiFi system.
IMPORTANT!
Hearing safety: listen at a moderate volume. using head-
phones at high volume can impair your hearing.
Traffic safety: do not use headphones while driving or cycling as you may cause an
accident.
This set complies with the radio interference requirements of the
European Union.
CAUTION
Use of controls or adjustments or performance of procedures
other than herein may result in hazardous radiation exposure
or other unsafe operation.