Filter
Top Products
12
English
Preparation
General notes
¶ Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
player.
¶ Please refer to the manuals of your TV, VCR, Stereo System
or other devices as necessary to make the best
connections.
¶ For better sound reproduction, connect the player’s audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See ‘Connecting to
optional equipment’.
Caution:
– Do not connect the player’s audio out jack to
the phono in jack of your audio system.
– Do not connect your DVD-player via your VCR.
The DVD image could be distorted by the copy
protection system.
Connecting to a TV
Component Video (Y CB CR) connection
1
Connect the Y, C
B
, C
R
out jacks on the DVD-player to the
corresponding in jacks on the TV using optional Y, C
B
, C
R
cable (Z).
2 Connect the Left and Right audio out jacks to the audio
left/right in jacks on the TV (A).
S-Video (Y/C) connection
1 Connect the S-Video out jack on the DVD-player to the S-
Video in jack on the TV using an optional S-Video cable (Y).
2 Connect the Left and Right audio out jacks to the audio
left/right in jacks on the TV (A).
Video CVBS connection
1 Connect the Video out (CVBS) jack on the player to the
video in jack on the TV using the video cable supplied (X).
2 Connect the Left and Right audio out jacks to the audio
left/right in jacks on the TV (A).
TV
YXA
Z
COAXIALOPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
SUB WF
SURROUND FRONT
CENTER
MULTICHANNEL AUDIO OUT
SURROUND FRONT
L
R
CVBS
AUDIO OUT
S-VIDEO
Y
C
B
C
R
VIDEO OUT
1
2
MAINS
L
R
L
R
Connecting to optional
equipment
Connecting to an amplifier equipped with
two channel analog stereo or Dolby
Surround
1 Connect the Left and Right audio out jacks of the DVD
player to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the optional audio cable
(A).
Connecting to an amplifier equipped with
two channel digital stereo (PCM) or to an
Audio/Video receiver equipped with a
multi-channel decoder (Dolby Digital™,
MPEG 2 and DTS)
1 Connect the player’s digital audio out jack (optical G or
coaxial F) to the corresponding in jack on your amplifier.
Use an optional digital (optical G or coaxial F) audio cable.
2 You will need to activate the player’s digital output (see
‘Personal Preferences’).
Digital Multi-channel sound
The digital multi-channel connection provides the best
sound quality. For this you need a multi-channel A/V
receiver that supports one or more of the audio formats
supported by your DVD player (MPEG 2, Dolby Digital™
and DTS). Check the receiver manual and the logos on the
front of the receiver.
TV
YX
Z
COAXIALOPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
SUB WF
SURROUND FRONT
CENTER
MULTICHANNEL AUDIO OUT
SURROUND FRONT
L
R
CVBS
AUDIO OUT
S-VIDEO
Y
C
B
C
R
VIDEO OUT
1
2
MAINS
L
R
L
R
AMPLIFIER
A
G
F
Warning:
Due to DTS Licencing agreement, the digital
output will also be in DTS digital out when DTS
audio stream is selected.
PREPARATION