Philips DCP851 Portable DVD Player User Manual


 
17
English
TROUBLESHOOTING
If it appears that the DVD-Video player is faulty, first consult this checklist.
It may be that something has been overlooked.
WARNING
Under no circumstances should you try to repair the set yourself as this
will invalidate the guarantee.
If a fault occurs, first check the points listed, before taking the set for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service centre.
Symptom Remedy
No power – Check if both plugs of the mains cord are
properly connected.
– Check if there is power at the AC outlet by
plugging in another appliance.
Check if the built-in battery is drained.
Check if car adaptor is connected appropriately.
Distorted picture – Check the disc for fingerprints and clean with
a soft cloth, wiping from centre to edge.
– Sometimes a small amount of picture distor-
tion may appear. This is not a malfunction.
Completely distorted – The PAL setting may be in the wrong
picture / no colour in status. Match your TV’s setting with the
the TV screen player’s setting.
No sound – Check audio connections. If using a HiFi
amplifier, try another sound source.
SETUP OPERATIONS
Screen
When the cursor highlights these settings, press OK to:
Display Type select display ratio
Brightness select brightness level
Contrast select contrast level
Press 1 to abort current settings or go back to previous menu level
Photo
When the cursor highlights these settings, press OK to:
Slide Show Frequency set the time between two photos
Slide Show Effect select 17 slideshow modes
Display Format switch between Normal and Widescreen
Photo Display switch between Slide Show and Browse
Press 1 to abort current settings or go back to previous menu level
Custom
When the cursor highlights these settings, press OK to:
Parental Control select parental options
DivX
R
VOD get DivX ID for VOD
Password change exisitng password (3308 by default)
Angle Mark select angle mark display options
Default restore factory settings
Press 1 to abort current settings or go back to previous menu level.
Note: Before using the 3,4 keys to select your desired angle mark, ensure the
disc has been recorded with angle mark and you have enabled the angle mark
option in the system menu.
P001-020_DCP851_79_Eng 2008.5.7 10:40 Page 17