Filter
Top Products
19
English
Program radio stations automatically
You can program a maximum of 30 preset
radio stations (FM).
1 In the tuner mode, press and hold
MODE/SCAN to activate automatic
program mode.
All available stations are programmed. »
The first programmed radio station is »
broadcast automatically.
Program radio stations manually
Note
You can program a maximum of 30 preset radio •
stations.
1 Tune to a radio station.
2 Press PROG to activate program mode.
3 Press / to allocate a number (1
to 30) to this radio station, then press
PROG to confirm.
The preset number and the frequency »
of the preset station are displayed.
4 Repeat the previous steps to program
other stations.
Note
To overwrite a programmed station, store another •
station in its place.
Select a preset radio station
1 In tuner mode, press / to select a
preset number.
Tip
Position the antenna as far as possible from TV, VCR, •
or other radiation source.
For optimal reception, fully extend and adjust the
•
position of the antenna.
5 Press to confirm the selection.
You should be able to hear »
the difference in compression
immediately.
Note
The best way to determine which of these DRC •
value settings suits you best is to experiment with
them on various source material.
Prune
This option lists active stations and removes
any stations that are in the list but have no
service in your area from the service list.
Those invalid stations in the service list have
a question mark (?) displayed in front of the
station name.
1 Select Prune stations and press .
All stations that have a question mark »
are deleted from the service list.
System
• [Factory reset]: Reset all the settings
of this unit to factory default. Press
to confirm reset.
• [SW version]: Display software
version of the unit.
Listen to FM radio
Tune to a radio station
1 Press TUNER to select FM.
2 Press / to tune to a specific
frequency.
Play starts automatically. »
Tip
You can press • MODE/SCAN to tune to the next
station with strong reception automatically.
EN