Filter
Top Products
• [DRC 0]: Dynamic Range Control is switched off.
• [DRC 1/2]: Dynamic Range Control is set to half
normal level.
• [DRC 1]: Dynamic Range Control is switched
on; the default setting recommended for noisy
environment.
4 Press OK/ to confirm.
To reset the tuner:
1 Follow steps 1-2 above to select [TUNERRST].
2 Press OK/ to confirm, and then press TUNING -
/TUNING + to select:
• [NO]: Cancel.
• [YES]: Reset the tuner.
3 Press OK/ to confirm.
Note
If no button is pressed within 10 seconds, the menu
•
exits.
Tip
Dynamic range control (DRC) adds or removes a
•
degree of compensation for the differences in the
dynamic range between radio stations.