Filter
Top Products
12
Set time and date
1
Dock the iPod / iPhone on the unit.
2 Open the iPod / iPhone.
Time and date information on the »
iPod / iPhone transfers to the unit
automatically.
To set time and date manually:
1 In standby mode, press and hold CLOCK
for 2 seconds.
The hour digits begins to blink. »
2 Rotate the knob clockwise/counter-
clockwise or press
/ to set the hour.
3 Press CLOCK to confirm.
The minute digits begin to blink. »
4 Repeat steps 2-3 to set the minute, year,
month, and day.
The week day is displayed »
automatically.
5 Repeat steps 2-3 to select the 12/24 hour
format.
6 Press CLOCK to confirm.
Turn on
1
Press .
The unit switches to the last selected »
source.
Switch to standby
1 Press again to switch the unit to
standby mode.
The time is displayed. »
1 Open the battery compartment.
2 Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Connect power
Caution
Risk of product damage! Ensure that the power •
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
•
AC adapter, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC adapter, ensure you
•
have completed all other connections.
Note
The type plate is located on the rear of the •
main unit.
1 Connect one end of the AC adapter to
the DC IN socket on the main unit.
2 Connect the other end of the AC adapter
to the wall outlet.
EN