Filter
Top Products
22 EN
Disconnect a device
1 Press and hold for more than 5 seconds
To disconnect, you can also turn off the connected device or move it •
beyond the communication range.
The Bluetooth indicator turns off.•
Re-connect a previously-connected device
Tip
For a previously-connected iPhone which Bluetooth function is enabled, once it is docked in this •
unit, it re-connects automatically.
1 Turn on the main unit.
2 On the device, set up the Bluetooth connection:
a Enable Bluetooth to search for other Bluetooth devices. (Refer to the
device user manual on how to enable the function.)
b When “ PHILIPS DC350” is recognized and displayed, select it to start to
connect.
3 Wait until the Bluetooth indicator turns on.
Re-connection is completed. »
Receive a phone call
Note
You can receive phone calls through this unit with devices that support the HFP or HSP profi le. •
1 Connect the Bluetooth device. (see ‘Connect with a Bluetooth device’ on page 21 )
2 When a call is received, you hear the incoming call alert tone. Press PAIRING to
accept the call.
To reject the call, press •
.
3 Speak into the MIC located on the front panel.
To increase or decrease the volume, press • VOL +/- .
To mute the microphone, press • MUTE . To unmute, press this button again.
To select to hear the audio from the device or from the main unit, press •
PAIRING
.
4 Press to end the call.
DC350_37.indd 22DC350_37.indd 22 1/7/2009 1:59:06 PM1/7/2009 1:59:06 PM