Filter
Top Products
Setup
2
1 In standby mode, press and hold SET
TIME/PROG for 2 seconds.
[24 HR] begins to blink. »
2 Press OK/ to select the 12/24 hour
format.
3 Press SET TIME/PROG to conrm.
The hour digits begin to blink. »
4 Press / to set the hour.
5 Press SET TIME/PROG to conrm.
The minute digits begin to blink. »
6 Repeat steps 4-5 to set the minute,
year, month, and day.
Set time and date
A
1 In the tuner mode, press and hold
SET TIME/PROG for more than
2 seconds to activate automatic
program mode.
[AUTO] (auto) is displayed. »
All available stations are »
programmed in the order of
waveband reception strength.
The rst programmed »
radio station is broadcast
automatically.
2 Press / to select a preset
number.
E
Tip
Detailed functions and features are •
described in the user manual.
Program and listen to
radio stations
A
Play from iPod/iPhone
B
Setup
2
Set the alarm timer
B
Activate and deactivate the alarm timer
1 Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
If the timer is activated, [ » AL 1]
or [
AL2] is displayed.
If the timer is deactivated, [ »
AL1]
or [
AL2] disappears.
Repeat alarm
1 When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing minutes »
later.
E
Tip
You can press
»
/ to adjust the interval to
repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding ALM 1 or ALM 2.
The alarm stops but the alarm »
settings remain.
1 Lift up the iPhone/iPod dock on the
top panel.
2 Place the iPhone/iPod into the dock.
Enjoy
2
3
You can set two alarms which go off at
different time.
1 Ensure that you have set the clock
correctly.
2 Press and hold ALM 1 or ALM 2 for
2 seconds.
[AL 1] or [AL 2] begin to blink. »
3 Press SOURCE on the top panel to
select an alarm sound source: iPod/
iPhone, FM tuner, or buzzer.
4 Press ALM 1 or ALM 2.
The hour digits begin to blink. »
5 Press / repeatedly to set the hour.
6 Press ALM 1 or ALM 2 to conrm.
The minute digits begin to blink. »
7 Repeat steps 5-6 to set the minute.
8 Repeat steps 5-6 to select whether
to ring alarm the whole week, on
weekdays, or at weekend.
9 Repeat steps 5-6 to set the alarm volume.
E
Tip
If you set iPhone/iPod playlist as the sound •
source, you must create a playlist in iTunes
called “PHILIPS” and import it to your
iPhone/iPod.
If no playlist is created in the iPod/iPhone •
or there is no song in the playlist, the unit
will wake to songs in the iPod/iPhone.
Enjoy
2
3
3 Press iPhone/iPod to select iPod/
iPhone source.
The connected iPod/iPhone »
plays automatically.
To pause/resume play, •
press OK/
.
To skip to a track, •
press
/ .
To search during play, •
press and hold
/ ,
then release to resume
normal play.
To go back to the previous •
iPod/iPhone menu, press
MENU. To scroll through
the menu, press
/ .
To conrm a selection, •
press OK/
.
If no key is pressed for »
more than 10 seconds,
OK/
acts back as the
play/pause key.
DC290_12_QSG_V2.1_EN.indd 5-7 8/6/2010 3:49:43 PM