Filter
Top Products
Setup
2
1 In standby mode, press and hold TIME
SET/AUTO SCAN for 2 seconds.
»
The hour digits begin to blink.
2 Press TUNING +/- to set the hour.
3 Press TIME SET/AUTO SCAN .
»
The minute digits begin to blink.
4 Press TUNING +/- to set the minute.
5 Press TIME SET/AUTO SCAN to
confi rm.
»
The week day digits begin to blink.
6 Press TUNING +/- to set the week day.
7 Press TIME SET/AUTO SCAN to
confi rm.
Set clock
A
1 In the tuner mode, press and hold TIME
SET/AUTO SCAN for more than 2
seconds to activate automatic program
mode.
»
All available stations are programmed
in the order of waveband reception
strength.
»
The fi rst programmed radio station is
broadcast automatically.
2 Press PRESET +/- to select a preset
number.
E
Tip
Detailed functions and features are •
described in the user manual.
Program and listen to radio
stations
A
Play from iPod
B
Setup
2
Set the alarm timer
B
Set alarm mode
1 Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
»
When the alarm time comes, the
selected iPod, radio or buzzer turns on.
Activate and deactivate the alarm timer
1 Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
»
If the timer is activated,
or
is displayed.
To deactivate the alarm timer, press •
ALARM 1 or ALARM 2 repeatedly
until
is displayed.
»
If the timer is deactivated,
or
disappears.
Repeat alarm
1 When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL .
»
The alarm repeats ringing minutes later.
E
Tip
You can press • TUNING+/- to adjust
interval to repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding ALARM 1 or ALARM 2 .
»
The alarm stops but the alarm settings
remain.
1 Push to open the dock compartment.
2 Place the iPod in the dock.
3 Press SOURCE repeatedly to select iPod
source.
»
The connected iPod plays automatically.
To pause/resume play, press •
.
To skip to a track, press •
/ .
To search during play, press and hold •
/ , then release to resume normal
play.
Enjoy
2
3
1 Ensure that you have set the clock
correctly.
2 Press and hold ALARM 1 or ALARM 2
for 2 seconds.
»
or and hour digits begin to
blink.
3 Press TUNING +/- repeatedly to set the
hour.
4 Press ALARM 1 or ALARM 2 to
confi rm.
»
or and minute digits begin
to blink.
5 Repeat steps 3-4 to set the minute.
6 Repeat steps 3-4 to select whether to ring
alarm on weekdays or at weekend.
»
“L XX(volume level)” begins to blink.
7 Repeat steps 3-4 to set the maximum alarm
volume.