Filter
Top Products
POWER SUPPLY
7
English
1 Make sure that the local voltage corresponds
to the voltage of the adapter (see
accessories).
2 Connect the power adapter to the player's
4.5 V DC socket and to the wall outlet.
• Always disconnect the adapter when you are
not using it.
• Open the battery compartment and insert 2
alkaline batteries.
Typical playing times under normal conditions:
Alkaline batteries: 5.5 hours (ESA off)
4.5 hours (ESA on)
• Remove the batteries if they are dead or if the
CD player is not to be used for a long time.
Note: In the right-hand corner of the display the battery condition will be indicated:
-Full batteries: no indication.
-Weak batteries: -symbol lights up. This symbol is not available when
rechargeable batteries are used.
-Dead batteries: -symbol flashes and the message bAtt appears. Replace
the batteries or connect the power adapter.
Batteries contain chemical substances, therefore they should be disposed of
properly.
Batteries, type LR6, UM3 or AA
(supplied or optional available)
Power adapter