To pause, press • .
•
To resume, press again.
To stop, press
• .
5 Troubleshooting
Warning
Never remove the casing of this Soundmachine. •
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this Soundmachine, check the following points before requesting service. If
the problem remains unsolved, go to the Philips web site (www.Philips.com/support), or contact Philips (see Contact
information). When you contact Philips, ensure that your Soundmachine is nearby and the model number and serial
number are available.
No power
Ensure that the power cord is connected securely. •
Ensure that there is power at the power supply socket. •
Ensure that the batteries are installed correctly. •
No sound
Adjust the volume. •
Ensure that the track played is of a compatible format. •
Display does not function properly./No reaction to operation of any of the controls.
1 Disconnect the AC power cord.
2 Connect the AC power cord after a few seconds.
Cannot play disc
Ensure that the disc label is inserted with the printed side facing up. •
Wipe the disc with bre cleaning cloth from the centre to the edge in a straight line. •
This disc may be defective. Play another disc. •
Ensure that the CD is a nalised CD/CD-R/CD-RW. •
Ensure that the laser lens is clean. •
Ensure that the CD is not encoded with copyright protection technologies. •
The CD skips tracks
Ensure that the CD is not damaged or dirty. •
Ensure that program/shufe mode is deactivated. •
Poor cassette sound quality
Ensure that heads in the cassette holder are clean.
•
Ensure that a NORMAL (IECI) cassette tape is used for record.•
Cassette does not work for record
Ensure that cassette tabs are not broken.
•