Filter
Top Products
Power Supply
Batteries (not included)
1 Open the battery door and insert two alkaline batteries,type AAA,
R03 or UM4,as indicated in the battery compartment.(See 1).
• Incorrect use of batteries can cause electrolyte leakage and will corrode the
compartment or cause the batteries to burst:
• Do not mix battery types:e.g. alkaline with carbon zinc. Only use batteries
of the same type for the set.
• When inserting new batteries,do not try to mix old batteries with the new
ones.
• Remove the batteries if the set is not to be used for a long time.
Batteries contain chemical substances,so they should be disposed
of properly.
General information
Antennas
• For MW, the set uses a built-in antenna.Direct this antenna for best
reception by turning the whole set.
Connecting earphones
•You can connect headphones to the headphone socket.
Locking the set
•You can lock the set in any mode by sliding the
LOCK
key.
➜ All keys are disabled.
•To unlock the set
➜ slide the
LOCK
key to
UNLOCK
.
Basic operation
1 Insert batteries as described in Power Supply.
➜
The clock information is displayed.
• Press
2
to switch on the set.
• Press
2
again to switch to standby mode.
2 To adjust volume, turn VOL.