Filter
Top Products
FEATURES
15
You can store up to 30 tracks to play in a program.
A single track may be stored more than once in the
program.
1 While playback is stopped, select a track with
∞ or §.
2 Press PROG P to store the track.
y PROGRAM lights up; the track number
programmed and P with the total number of
stored tracks are displayed.
3 Select and store all desired tracks in this way.
4 Press 2; to start playback of your selected tracks.
y PROGRAM is shown and playback starts.
• You can review the program by pressing PROG P for
more than 2 seconds.
y The display shows all the stored tracks in sequence.
Notes: – If you press
PROG P
and there is no track selected,
SELECt
is displayed.
– If you try to store more than 30 tracks,
FULL
is displayed.
Clearing the program
• While playback is stopped, press 9 to clear program.
y CLEAr is displayed once, PROGRAM goes off,
and the program is cleared.
Note: The program will also be cleared if the power
supply is interrupted, or if the CD-player lid is opened, or if the set switches
off automatically.
PROG
MODE
DBB
P
Programming track numbers
English
ACT7585/01 eng 14/2/01 11:04 Page 15