Filter
Top Products
5
EnglishFrench
German
Italian
SpanishDutchSwedishFinishPolishTurkishRussian
Norwegian
Danish
Portuguese
Cable Connections (see illustration B)
Inputs
1. INPUT 1 : 5.1-channel
9 pin mini DIN cable to connect a 5.1-
channel audio-visual source.
2. INPUT 2 :
STEREO CHANNEL
3.5 mm stereo jack to connect a stereo
audio-visual source
3. INPUT 3 :
STEREO CHANNEL
2 x RCA jack to connect a stereo audio-
visual source.
Output
4. C
ENTER
To connect the center satellite speaker.
(DIN jack)
5. C
ENTER
To connect the center satellite speaker.
(3.5mm stereo jack)
6. R
EAR RIGHT
To connect the rear right satellite speaker.
7. R
EAR LEFT
To connect the rear left satellite speaker.
8. FRONT RIGHT
To connect the front right satellite speaker.
9. FRONT LEFT
To connect the front left satellite speaker.
10. AC MAIN
Power cable to be connected to the AC
outlet.
Remote Control ( See Illustration A)
À STANDBY
To switch the speaker system into
ON or OFF
(=STANDBY) mode
Á MUTE
To switch the speaker system into mute
mode, and normal mode again
 MASTER VOLUME - / +
To adjust the master volume higher or lower
à FADE REAR / FRONT
To adjust the loudness of the rear and the
front satellite speakers
Ä BASS - / +
To adjust the bass level according your per-
sonal preference
Å TREBLE - / +
To adjust the presence of the higher tones
according to your personal preference
Æ FLAT
Removes any bass or treble boost applied
by the user.
Ç GAME/ MOVIE/ MUSIC
Choose from either the game, movie or mu-
sic button for optimal pre-set sound repro-
duction per genre
È INPUT 1/ INPUT 2/ INPUT 3
Make your choice of audio-visual source
selection. Two separate stereo input sources
and one 5.1-channel input source can be
connected to this multi-channel speaker
system.
Explanation (Illustration page 3)
MMS506Final.p65 7/29/02, 2:12 PM5