Filter
Top Products
Erasing Memories
Receiving Incoming Calls
The ring indicator icon will blink when the phone rings. Pick up the handset or
press to receive the call. To adjust the handset or speaker volume during
conversation, press repeatedly or ...
Making Calls
Make a call either by manual or memory dialling. The buttons entered can be
seen through the display.
Manual dialling
Memory dialling
For memories stored in ... , press Shif
and ... . A long beep and the dial tone will be heard.
1
3
4
1
M9
M10
M12
M1
M2
M3
M4
M5
M6
M7
M8
M11
1
9
1
2
3
4
5
6
7
8
10
11
12
of
1
M9
M10
M12
M1
M2
M3
M4
M5
M6
M7
M8
M11
1
9
1
2
3
4
5
6
7
8
10
11
12
The Mute Feature
This feature is used during phone conversation in order for you to talk in private to
somebody else without the person on the other line hearing.
• Press to turn the microphone off.
• Press to resume conversation.
The call Timer Feature
When receiving an incoming call, the conversation time will start automatically.
When making a call, the conversation time will be shown on the display 10
seconds after the telephone number is entered.
-
>The and the conversation time will be shown on the display.
Terminating the call will stop the call timer automatically.
-
>The total conversation time will remain displayed for around 5 seconds.
The , , and [R] (Flash) Buttons
These buttons can be used for special public or private exchange service functions.
Please consult your network operator for further details concerning the network
services provided.
The Last Number Redial Feature
The last number dialled will be stored automatically until future replacement.
To redial the number:
Chain Dialling
In order to dial 2 or more telephone numbers consecutively, press the next
memory button immediately after the first telephone number has been dialled.
Mixed Mode Dialling
If the telephone is set to pulse dialling mode, pressing will send the next digits
in tone mode. The tone mode makes it possible to access public services such as
telephone banking. After hanging up, the telephone will automatically reset back
to pulse dialling mode.
Handsfree Conversation
During conversation, you can switch from handset to handsfree conversation,
i.e. using the speaker microphone.
The Listening-In Feature
This feature allows handset conversation and listening-in at the same time. During
handset conversation, press
. To end only listening-in, press . To end the
entire call, replace the handset.
The dial tone
should stop
12
12
1
1
For memories stored in M1...M12, press M1...M12.
...
of
Dial the telephone number.
Lift the handset
or press Speaker.
or
or
Lift the handset
or press Speaker.
To dial memories stored in M1...M12, press M1...M12.
1
12
of
Note: The telephone number can only be redialled if it consists of not more than 32 digits.
Redial/Pause is the first button pressed after you take the line. If other buttons are
pressed first, the previous telephone number will be replaced.
lift the handset
or press Speaker,
press Redial/Pause.
or
of
Press and hold
the Speaker
Replace the handset
Release the Speaker
Press [+] or [-] to adjust
to the desirable volume.
To terminate the
conversation.
Note: To switch from handsfree to handset conversation, lift the hand set.
or
1
12
1
1
To dial memories stored in ... ,
press and ... .
Philips Consumer Help Desk
Unit 4, Elmwood, Chineham Business Park,
Crockford Lane, Basingstoke, Hampshier
RG24 BWG, United Kingdom.
Phone :0645 282828
Fax :01256 707335