Filter
Top Products
Alarm Sleep
4 Press ALM 1/ALM 2 to confirm the setting.
➜ AL1/AL2 icon and the minute digits flash.
5 Hold down or press TUNING +/- repeatedly
to adjust the minutes.
6 Press ALM 1/ALM 2 to confirm the setting.
Helpful hints:
– In standby mode, press DATE to display
month and day information. In radio mode,
to display alarm time, press ALM 1/ALM 2.
– The currently displayed alarm time is the time
for the bracketed (selected) AL1 or AL2
(See 4).
Selecting alarm mode (activating)
1 Press RADIO ON/OFF to switch to standby.
2 Select your choice of alarm mode: either
radio, or buzzer by using the RADIO•BUZ
slider.
3 Press ALM 1/ALM 2 once or more to
display .
➜ When alarm is activated, is displayed.
(See 4).
• At the set alarm time, radio or buzzer will
switch on automatically.
Switching off the alarm
There are three ways of switching off the
alarm. Unless you choose to cancel the alarm
completely, the DAILY ALARM RESET option
will be automatically kept activated from the
time your alarm first goes off.
call at the same time for the following day:
Daily alarm reset
If you want the alarm to be stopped
immediately but also wish to repeat the alarm
1 During the alarm call, press once
SLEEP/ALARM RESET or RADIO
ON/OFF.
Repeat alarm
This will repeat your alarm call at 9-minute
intervals.
1 During the alarm call, press
REPEAT ALARM/BRIGHTNESS
CONTROL.
Switching off the alarm completely
Press once or more corresponding
ALM 1 or ALM 2 until disappears.
Sleep
The clock radio has a built-in sleep timer,
which enables the set to be automatically
switched off during radio playback after a set
period of time.
Setting the sleep time
1 During radio playback, set your timer by
pressing repeatedly SLEEP until the desired
timer option appears.
➜ Selections are follows (time in minute)
10=20=30=60=90=120=OFF
=10
2 The set will turn off automatically at the
selected time.
3 To cancel the timer function, either
press SLEEP once or more until “OFF”
appears, or press RADIO ON/OFF to
switch to standby.
➜ “SLEEP” disappears when sleep function is
cancelled.
Note:
– The sleep function does not affect your
alarm time setting(s).
Illumination brightness
Press REPEAT ALARM / brightness con-
trol once or more.
• The brightness of the display can be adjusted:
High ➟ Low ➟ Off ➟ High
.
Low battery indication
When the batteries of the unit are running
low, the low battery icon will be displayed,
indicating that the batteries should be
replaced soon.