Filter
Top Products
SWM-PA Series
Pole Adapter for the
Spectra
®
Compact
Wall Mount
Installation/Operation Manual
C294M (11/98)
1. Installation and servicing should only be done by qualified service personnel
and conform to all local codes.
2. Installation shall be done in accordance with all local and national electrical
and mechanical codes utilizing only approved materials.
Please thoroughly familiarize yourself with the information in this
manual prior to installation and operation.
The SWM-PA Series Pole Adapter is designed to adapt Pelco’s SWM Series Spec-
tra
®
Compact Wall Mount to a pole. It can be used for either indoor or outdoor
applications. The adapter is supplied with two stainless steel straps and two stain-
less steel screws. The adapter is attached to a pole with the two straps, and a
mounting cleat (supplied with the wall mount) is installed on the adapter with the
two stainless steel screws. Once the mounting cleat is firmly in position on the
adapter, the SWM wall mount is then attached and held in place by a set screw.
The adapter and mounting cleat both have a feedthrough opening for electrical
cables, not a conduit fitting.
The adapter is constructed of aluminum and has either a light gray or black polyes-
ter powder coat finish.
SWM-PA-GY Pole adapter for use with the SWM Series Spectra
®
Compact
Wall Mount. Gray finish.
SWM-PA-BK Same as SWM-GY, except black finish.
Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 • FAX (800) 289-9150
International Customers: Tel (1-559) 292-1981 or FAX (1-559) 348-1120
2.0 DESCRIPTION
1.0 WARNINGS
2.1 MODELS
= Vertical bar in the right margin indicates change or addition.