Filter
Top Products
This rating is contingent upon having a
minimum of 3 dB of amplifier headroom
available.
Harmonic Distortion
Second and third harmonic distortions
vs. frequency are plotted in figures 5 and
6 for two power levels, ten percent (10%)
of rated input power and either one
percent (1%) of rated input power or one
Watt, whichever is greater. Distortion is
read from the graph as the difference
between the fundamental signal
(frequency response) and the desired
harmonic. As an example, a distortion
curve that is down 40 dB from the
fundamental is equivalent to 1% distortion.
Architectural and Engineering
Specifications
The loudspeaker system shall have an
operating bandwidth of 74 Hz to 18 kHz.
The nominal output level shall be 96.0 dB
when measured at a distance of one
meter with an input of one Watt. The
nominal impedance shall be 8.0 Ohms.
The maximum continuous power handling
shall be 250 Watts, maximum program
power of 500 Watts and a peak power
input of at least 1,000 Watts, with a
minimum amplifier headroom of 3 dB.
The nominal radiation geometry shall be
90 degrees in the horizontal plane and
40 degrees in the vertical plane. The
outside dimensions shall be 18.75 inches
high by 14.00 inches wide by 13.19 inches
deep. The weight shall be 31 pounds.
The loudspeaker system shall be an
Architectural Acoustics model Quadra 10.
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.
4