Filter
Top Products
SP
™
3X INPUT
Power Handling
There are many different approaches
to power handling ratings. Peavey rates
this loudspeaker system’s power handling
using a full-range form of the AES
Standard 2-1984. Using audio band 20 Hz
to 20 kHz pink noise with peaks of four
times the RMS level, this strenuous test
signal assures the user that every portion
of this system can withstand today's high
technology music. This rating is contingent
upon having a minimum of 3 dB of
amplifier headroom available.
Mounting
This unit is not designed for overhead
suspension. SA-1 stand mount adapter
built-in, and four large rubber feet on
bottom for floor use.
Architectural and Engineering
Specifications
The loudspeaker system shall have an
operating bandwidth of 54 Hz to 17 kHz.
The nominal output level shall be 99.0 dB
when measured at a distance of one
meter with an input of one Watt. The
nominal impedance shall be 8.0 Ohms.
The maximum continuous power handling
be 500 Watts, maximum program power of
1,000 Watts and a peak power input of at
least 2,000 Watts, with a minimum
amplifier headroom of 3 dB. The nominal
radiation geometry shall be 90 degrees in
the horizontal plane and 45 degrees in the
vertical plane. The outside dimensions
shall be 33.63 inches high by 21.38
inches wide by 22.88 inches deep. The
weight shall be 92 pounds. The
loudspeaker system shall be a Peavey
model SP 3X.
3 + 2 YEAR LIMITED WARRANTY
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898, Meridian,
Mississippi 39301-2898.