Panasonic SL-SV590 Portable CD Player User Manual


  Open as PDF
of 6
 
6
RQT8542
Listening to the radio (FM TUNER ONLY)
Receiving an FM broadcast clearly
Set to “CITY” if reception is poor or if there is interference from
another station.
Each time you press and hold
CITY/NOR
No display
(canceled)
CITY
Set to “MONO” when there is noise during FM reception.
Sound becomes monaural, but noise is reduced.
Each time you press
Selecting stereo or monaural FM
FM MONO/ST
No display
(stereo)
MONO
Sound quality
Each time you press
pThe effect may differ with different kinds of music.
EQ
S-XBS
Boosts the
bass
No display
(canceled)
Enhanced
S-XBS
To obtain good reception
The headphone/earphone cord is also the FM antenna so extend it
instead of leaving it coiled.
When connecting the unit to other equipment, set the volume
level between 10 to 15, then use the volume control on the other
equipment to adjust the volume.
Turn off this unit and the other equipment before connection.
Insert each plug fully. [Plug type: 3.5 mm (
1
/
8
in.) stereo]
To CD or AUX
terminals
Audio system
and so on
Audio cable (not included)
pYou cannot use an optical cable.
Connecting to other equipment
Main unit
Erasing a memorized station:
Perform step
for “Storing stations in memory”
(
above)
.
Press to select the memorized station to be erased.
pPress and hold to change rapidly.
Do each of the following steps within 10 seconds.
Press.
pThe frequency number flashes.
Press and hold
until “- - - -” flashes.
Press.
1
FM
M
- -.- -
MEMO
MEMO
MEMO
(backward)
U
T
(forward)
HOLD
U VOL T
CITY/NOR
FM MONO/ST
RADIO
MEMO
EQ
TUNE MODE
RADIO
T
U
OPR OFF
107.10
FM
1
107.10
FM
M
Press to turn on the radio.
pPress [OPR OFF] to turn off the radio.
Press to adjust the volume. (0 to 25)
(VOLU: Decrease VOLT: Increase)
Slide to cancel
HOLD.
cancel
Press to select the station.
(U: Backward T: Forward)
pPress and hold to scan the
stations rapidly.
p
“
TUNED
”
appears when tuned.
pWhen
“
M
”
is displayed, press
[TUNE MODE] to cancel it.
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local
authorities or dealer and ask for the correct method of disposal.
-If you see this symbol-
Change the frequency step according to the area.
Press and hold
until the step appears.
Do each of the following steps within 10 seconds.
Each time you press
either to select
Press and hold until the frequency appears
to confirm the step.
FM
U0.2
When using overseas
U0.2 U0.1 E
FM 0.2 MHz
(original setting)
FM 0.1 MHz
FM 0.05 MHz
MEMO
RADIO
(backward)
U
T
(forward)
Returning to the previous frequency step:
Repeat the above procedure.
pChanging the step erases the stations you stored in memory.
Side of the main unit
wStoring stations in memory
Press to display
“
M
”
.
Do each of the following steps within 10 seconds.
Press.
Press to select the
frequency.
pPress and hold to scan the
stations rapidly.
Press.
Press to select the memory
number.
pPress and hold to change
rapidly.
Press to store the station.
Repeat steps to to program up to 20 stations.
MEMO
1
107.10
FM
M
1
98.00
FM
M
1
107.10
FM
M
TUNE MODE
MEMO
(backward)
U
T
(forward)
MEMO
(backward)
U
T
(forward)
Storing stations in memory/
Listening to a memorized station
wListening to a memorized station
Perform step
for “Storing stations in memory”
(
above)
.
Press to select the memorized station.
pPress and hold to change rapidly.
p“TUNED
”
appears when tuned.
Press to adjust the volume.
(backward)
U
T
(forward)
(decrease)
U VOL T
(increase)
 previous