Panasonic SL-MP30 Portable CD Player User Manual


 
Sequential Play
Basic Play
OPEN
3
4
2
HOLD
1
OPEN
O
P
E
N
V
O
L
U
M
E
/
L
R
5
S
-
XBS
HOLD
H
O
L
D
Label must face upward.
Track number in play
Elapsed playing time of each track
3
Plug type:
3.5 mm (1/8 in.) stereo
Close the lid.
Button Display/reference
Operation
To pause play
To stop play
To turn off the
unit
Skip forward/
backward
(skip function)
Rapid forward/
backward
(search function)
Off mode
Stop mode
For your reference:
) indication
This indication appears for about 30 seconds if [1/;] is
pressed when no disc is loaded in the unit or if the disc
is not properly secured.
* indication
This indication appears for about 10 minutes when the
lid is opened. (However, the indication does not appear
when the unit is off.)
Removing discs
1 Press [] to stop play and disc rotation.
2 Slide [OPEN 1] to open the lid.
3
Press [PUSH] to release the disc.
Do not stop the disc by hand or try to remove it before it
stops rotating. This can damage CDs.
Note!
Never insert foreign objects into the unit.
Auto-off function
If you leave the unit in stop mode for about 10 minutes
(30 seconds if disc is not loaded), it turns off to save the
batteries.
O
P
E
N
P
U
S
H
P
U
S
H
H
O
L
D
During program play (page 4), these buttons are
used to skip forward or backward through the
programmed sequence of tracks.
You cannot skip to tracks that have been played
in random or random repeat play (page 4).
During program play, 1-track repeat play, random
play and random repeat play (page 4), search op-
eration is limited to the current track only.
Press during play.
Press during play.
Press during stop mode.
Press during play.
(Press [:] twice to skip to the
beginning of the previous track.)
Press again to restart play.
Press and hold during play.
Backward
Forward
S
-
XBS
S
-
XBS
Total number of tracks
Total playing time
Resume function notes
Opening the lid while in the stop mode or replacing the disc while in the off mode cancels the function. (It may re-
main active if you replace a disc in the off mode.)
Play may resume from the beginning of the next track if you stopped play near the end of a track.
The resume function works automatically and cannot be turned off.
No indicator is shown.
Resume function
Play starts from the beginning of
the current track the next time you
press [1/;].
Note on CD-R and CD-RW
This unit can play CD-DA format audio CD-R and
CD-RW that have been nalized
§
upon completion
of recording. It may not be able to play some CD-R
or CD-RW due to the condition of the recording.
§
Finalizing is a process that enables CD-R/CD-RW
players to play audio CD-R and CD-RW.
Follow steps 15.
In step 2: Connect the stereo headphones or stereo earphones to the [Ë] jack. (Plug in rmly.)
In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when
pressed while the level is displayed. If any other display is shown, it changes to show the current level.
Play stops automatically when all the tracks have been played.