Filter
Top Products
4
Other Play Methods
The letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section. (See below.)
Skip play
The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
1 Select the desired track.
2
Program play
Up to 24 tracks can be entered in the programmed se-
quence.
Preparation: Put unit in stop mode.
1 Select the desired track.
2 Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
3
Repeat steps 1 and 2 to program all
the desired tracks.
4
∫ To program the same track in the se-
quence more than once
∫ After step 2, press [MEMORY/RECALL] the desired
number of times.
∫ If “'” is displayed
∫ No more tracks can be programmed.
∫ To confirm the contents of the program
∫ Press [MEMORY/RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display in sequence.)
∫ To delete the entire programmed se-
quence
∫ Press [∫,OPR OFF].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
Repeat play/Random play
Press [MODE] while disc is playing or
when unit is in stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)(----------------]
One track is repeated. |
v|
All-track repeat (`) |
All the tracks on the disc are repeated. |
v |
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v |
Random repeat (RANDOM,
`
) |
The tracks play repeatedly in random |
order. |
v |
Cancel (no indicator is shown)
--------------}
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1
`
M)(------------]
One track is repeated. |
v|
Memory repeat (
`
M) |
The programmed tracks are repeated. |
v
|
Cancel (
M) -------------------------------------------}
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
≥The mode is canceled when you disconnect the power
source.
Changing the sound quality
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS>TRAIN>Cancel (no indicator is shown)
^==========b
S-XBS:
Select this setting to boost the low frequency range re-
sponse.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your earphones while riding on the train,
or to reduce fatigue when listening for a long period of
time.
Note!
The setting returns to S-XBS when you disconnect the
power source.
RQT5873
H
F
H
MEMORY/RECALL
B
F
MODE
E
EQ
D
Main unit
Remote control
EQ
(Beep)
Location of Controls
Portable CD Player A
A Headphone volume control
buttons (j,VOLUME,i)
B Memory/recall button
(MEMORY/RECALL)
C Display
D EQ button (EQ)
E Mode button (MODE)
F Play/pause button (1;)
G Open switch (OPEN 1)
H Skip/search buttons
(:, 96, 5)
I Stop/operation off button
(∫,OPR OFF)
J DC IN jack
(DC IN 4.5 V K)
K Hold switch (HOLD)
L Headphone jack (Ë)
M CD release button (PUSH)
N Hole for car mounting base
O Battery lid lock (LOCK)
Wired remote control B
A Skip/search buttons
(:, 9)
B Play/stop/operation off button
(∫/1)
C Volume control buttons
(j,VOL,i)
D Earphone jack
E Clip
F Hold switch (HOLD)
G EQ button (EQ)
H Plug
A
B
J
N
H
I
B
G
D
C
M
A
E
KL
F
H
A
BC
E
F
G
D
O