Panasonic SL-CT350 Portable CD Player User Manual


 
Press after all
desired tracks
have been
programmed.
Press. (Main unit)/
Press during play.
(Remote control)
(Mdisappears.)
9
(
Forward
)
:
(
Backward
)
1/;
(Main unit)
/1
(Remote control)
MEMO
(Main unit)
The anti-skip function (ANTI-SKIP
SYSTEM) reduces or eliminates
skipping caused by vibration. You can
change the anti-skip memory time.
While stopped, each time you
press and hold [MEMO]
M
2
10
AB repeat
(
below)
`
`
RANDOM
A
1
B
`
RANDOM
`
3d-1(3D) 3d-2(3D)
S-XBS
S-XBSr
1
251
5
1
Sound
quality
4
Each time you press [EQ]
[Press [EQ] twice consecutively while 3D
is displayed. (Main unit)]
Boosts
the bass
No
display
(canceled)
Enhanced
S-XBS
Sound field
of 3D
Enhanced
3d-1
(Main unit)
/1
(
Remote control
)
1/;
(Main unit)
/1
(
Remote control
)
9
(
Forward
)
:
(
Backward
)
Elapsed play time
of track
Number of tracks
Total play time
1/;
(Main unit)
Pause
Stop/
Turn off
Press again to restart play.
Press again to turn the unit off.
(Main unit)/
Press and hold to turn the unit off.
(
Remote control
)
If the unit is left in stop mode for
approximately 10 minutes, it turns
itself off automatically.
Search
Press [:] twice consecutively to
skip to the previous track during play.
You cannot use [:] to skip to any
previous tracks during random and
random repeat (
right) modes.
You can only search within the current
track except for during all track repeat
(
right) and regular play.
During play,
press and hold.
Skip
Press.
Press.
Press.
Play
Press.
1
100
Current track
number
Play begins from the track where you
last stopped play (Resume function).
(This will be cancelled if you open the
lid while play is stopped.)
Open lid
OPEN 1
Slide in
direction
of arrow.
HOLD
(function
lock)
HOLD 1
(Main unit)
HOLD
(
Remote control
)
Slide in direction of arrow.
(Slide in opposite direction to
cancel.)
The unit and remote control each
have independent HOLD switches.
Button control guide
References to the remote control apply only to SL-CT352.
VOL
r
(
Increase
)
s (
Decrease
)
Volume
control
(0–25)
Press.
Inserting/removing a disc
MODE
(Main unit)
Play
modes
EQ
(
Remote control
)
Each time you press and
hold [EQ]
Tone off
Tone on
bP on
bP oFF
Specifying the AB segment
Press [MEMO] at the start point (A)
and once more at the end point (B).
Stop or skip (
left) to cancel.
If you do not specify point B this will
automatically be set as the end of the
disc. Repeat begins when this point is
reached. You can specify point B again
by pressing [MEMO].
Each time you press [MODE]
One
track
repeat
All
track
repeat
Random
Random
repeat
No
display
(canceled)
3d-1 or 3d-2 disappears after
being selected and 3D appears
instead.
The effect may differ with different
kinds of music.
Depending on the recording
conditions, sound may be interrupted
when switching between EQ settings.
RQT7830
While stopped, press [:]
or [9] to select the track,
then press [MEMO].
Sound
enhanced mode,
10-second
anti-skip memory
Anti-skip
enhanced mode,
45-second
anti-skip memory
Track number
Sequence number
POS 2
POS 1
Will appear after
[MEMO]
is pressed
Note on CD-R and CD-RW
(CD-DA)
For CD-DA format, use a music disc and finalize
§
it after recording. The unit
may not be able to play some discs due to the condition of the recording.
§A process performed after recording that enables CD-R/CD-RW players to
play audio CD-R and CD-RW.
Program
play
(desired
tracks
only)
Anti-skip
mode
Remote
control
operation
tone
SL-CT352
EQ
Play
MEMO
Confirm
tracks
selected
(Main unit)
/1
(Remote control)
Press during
play.
Cancel
The volume returns to 10 when you
disconnect the power source.
Repeat to program up to 20 tracks.
During play
While paused
or