Filter
Top Products
RQT9422
24
Connecting this unit to a computer
USB cable (included)
Insert the USB
cable straight in
the same direction
as that of the
terminal.
This unit
Computer
*
Even if you connect this unit to the computer
without the battery or with the depleted battery, the
computer cannot recognize this unit (
➜
page 33).
g System requirements (OS)
Windows 2000 (SP4), Windows XP and SP2, SP3,
Windows Vista and SP1 (As of December 2008)
*
Please see page 31 for details of system requirements.
g Removing the USB cable
Double-click the icon (Windows 2000/Windows XP: [ ], Windows
Vista: [ ]) on the task tray at the bottom of the computer screen
and follow the on-screen instructions to remove the USB cable. (The
icon may not be displayed depending on the OS settings.)
After the cable is removed, this unit turns off.
g USB mass storage function
This unit functions as a USB memory and is
recognized as a computer’s external storage device.
Data files in the computer can be transferred and saved in this unit.
*
When the unit is connected to the computer, the computer may
not start (restart). It is recommended that the USB cable is
removed from this unit when starting (restarting) the computer.
*
When the unit is connected to the computer, if you start (restart) the
computer or the computer enters standby mode, the computer may not
recognize the unit. Disconnect the unit and reconnect to the computer
or reconnect the unit after the computer is restarted.
*
Operation is not guaranteed when 2 or more USB devices are
connected to 1 computer, or a USB hub or extension cable are used.
*
Please see the Operating Instructions for the computer.
You can copy files recorded on this unit to the
computer.
• Start the computer beforehand.
• Press
STOP
to stop the unit.
1. Insert the USB cable into this unit.
2. Insert the USB cable into the computer.
•
Do not use any other USB connection cables except the supplied one.
“ ” is displayed on the unit’s screen when the computer recognizes this unit.
Use the supplied USB cable.
Do not use the supplied cable with other devices.
Caution: Use only the included USB cable with a
ferrite core when connecting to computer.
When the computer does not recognize this unit
If “
” is displayed, enter the password (
➜
page 21).
If “ ” is displayed, disconnect this unit from the computer
once, replace the batteries and reconnect the unit to the computer.