Panasonic SL-SX280 MP3 Player User Manual


 
4
Other Play Methods
The letters such as A in the illustrations refer to the descriptions in the Location of Controls section. (See page 2.)
Skip play
The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
1
Select the desired track.
2
Program play
Up to 24 tracks can be entered in the programmed se-
quence.
Preparation: Put unit in stop mode.
1
Select the desired track.
2
Register in sequence.
(The indication M and the programmed se-
quence appear on the display.)
3
Repeat steps 1 and 2 to program all
the desired tracks.
4
To program the same track in the se-
quence more than once
After step 2, press [MEMORY/RECALL] the desired
number of times.
If ' is displayed
No more tracks can be programmed.
To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display in sequence.)
To delete the entire programmed se-
quence
Press [,OPR OFF].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
Repeat play/Random play
Press [MODE] while disc is playing or
when unit is in stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)(----------------]
One track is repeated. |
v|
All-track repeat (`) |
All the tracks on the disc are repeated. |
v |
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v |
Random repeat (RANDOM, `) |
The tracks play repeatedly in random |
order. |
v |
Cancel (no indicator is shown)
--------------}
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1
`
M)(------------]
One track is repeated. |
v|
Memory repeat (
`
M) |
The programmed tracks are repeated. |
v |
Cancel (
M) -------------------------------------------}
Note!
You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
You cannot select random play or random repeat play
during program play.
The mode is canceled when you disconnect the power
source.
Changing the sound quality
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS>TRAIN>Cancel (no indicator is shown)
^==========b
S-XBS:
Select this setting to boost the low frequency range re-
sponse.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your earphones while riding on the train,
or to reduce fatigue when listening for a long period of
time.
Note!
The setting returns to S-XBS when you disconnect the
power source.
RQT5792
This system deals with skipping in a variety
of ways:
An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
The anti-skip memory ( 40 seconds,
10 seconds) fills in interruptions caused by bumps and
vibrations.
The anti-skip system works automatically while the
unit is on and cannot be canceled.
When bumps continue repeatedly
The message SORRY appears on the display and
sound is interrupted.
Note!
The anti-skip memory compresses digital signals.
Anti-Skip System
S-XBS
VOL
TRAINTRAIN
ALL
RANDOM
SORRY
1
M
C
A
G
O
P
R
O
F
F
F
O
P
R
O
F
F
G
O
P
R
O
F
F
M
E
M
O
R
Y
/
R
E
C
A
L
L
EQ
VOL
VOL
B
F
O
P
R
O
F
F
MODE
E
M
E
M
O
R
Y
/
R
E
C
A
L
L
EQ
VOL
VOL
D
SL-SX280
SL-SX240
Main unit
Remote control
EQ
(Beep)
SL-SX280