Filter
Top Products
6
Other Play Methods with MP3 files
Track skip play
Plays from the selected track through to the last track in
the current album.
Plays from the selected track through to the last track
on the disc.
Preparation: Put unit in stop mode.
1
2
Select the desired track.
3
Album skip play
You can skip album to album.
Plays from the first track of the selected album through
to the last track in the current album.
Plays from the first track of the selected album through
to the last track on the disc.
Press during play or stop mode to se-
lect the desired album.
When pressed while stopped
The album number and the total number of tracks within
it appears on the display.
Press [1/;] to start play from the first track in album 3.
Press [:] or [9] first to select another track to start
play.
Resume play
This function allows you to listen from the beginning of
the track where play stopped because the unit was
powered off (or switched to stop mode). It is useful
when listening to CDs in the car, etc.
Release
The letters such as A in the various illustrations refer to the descriptions in the “Location of Controls” section (see page 2).
Repeat function
Press during play or stop mode.
The setting switches as shown below each time you
press the button.
1-track repeat (1 `)(----------------]
One track is repeated. |
v |
Album repeat (`) |
All the tracks in the album are repeated.|
v |
Cancel (no indicator is shown) --------------}
1-track repeat (1 `)(----------------]
One track is repeated. |
v |
All-track repeat (`) |
All the tracks on the disc are repeated. |
v
|
Cancel (no indicator is shown) --------------}
When pressed during program play
The setting switches as shown below each time you
press the button.
1-track repeat (1
`
M)(------------]
One track is repeated. |
v |
Memory repeat (
`
M) |
The programmed tracks are repeated. |
v
|
Cancel (M) -------------------------------------------}
Changing the sound quality
Press during play or stop mode.
The setting switches as shown below each time you
press the button.
S-XBS
<>
Cancel (no indicator is shown)
S-XBS:
Select this setting to boost the low-range response.
NOR
RESUME
RANDOM
N
G
H
/
N
NOR
RESUME
RANDOM
NOR
RESUME
RANDOM
N
D
R
E
P
E
A
T
Program play
Up to 20 tracks can be entered in the programmed se-
quence.
Preparation: Put unit in stop mode.
1
2
Select the desired album.
3 Select the desired track.
4 Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
5 Repeat steps 2, 3 and 4 to program
all the desired tracks.
6
∫ To program the same track in the se-
quence more than once
∫ After step 4, press [MEMORY/RECALL] desired
number of times.
∫ If “'” is displayed
∫ No more tracks can be programmed.
∫ To confirm the contents of the program
∫ Press [MEMORY/RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display in sequence.)
∫ To delete the entire programmed se-
quence
∫ Press [∫,OPR OFF].
For your reference:
If album mode was engaged, disc mode is engaged au-
tomatically when you press [MEMORY/RECALL].
Random play
Tracks in an album or disc are played randomly until
you release the mode or press [∫,OPR OFF].
Randomly plays all the tracks in the current album.
Randomly plays all the tracks on the current disc.
1
(“ RANDOM ” and “
`
” appear on the display.)
2
For your reference:
≥It is also possible to press [
M
ALBUM
L
] and [9]
while the unit is in stop mode to change the first track
to be played.
≥Program play is not possible in the random mode.
≥[REPEAT] does not work in the random mode.
Release
N
NOR
RESUME
RANDOM
G
C
M
E
M
O
R
Y
/
R
E
C
A
L
L
H
/
Album mode
Disc mode
Album mode
Disc mode
ALBUM
F
H
/
NOR
RESUME
RANDOM
N
N
NOR
RESUME
RANDOM
E
S
-
X
B
S
Album mode
Disc mode
ALBUM
F
Album mode
Disc mode
ALBUM
S
-
XBS
ALBUM
TRACK
MP3
Album number Number of tracks
in album 3