Filter
Top Products
AM
Try various directions to obtain
optimum reception.
FM
The headphone/earphone cord is also
the FM antenna, so extend it instead of leaving it coiled.
8
Change the frequency step according to the area.
Preparation: Press [RADIO/BAND] to switch on the power.
Press and hold [RADIO/BAND]
until the
step
appears.
Within 10 seconds
Press to select the step.
Each time you press [j
:
,
9
i]
Within 10 seconds
Press and hold [MEMORY/RECALL] until the frequency appears
to confirm the step.
∫To return to the previous frequency step
Repeat the above procedure.
≥Changing the step erases the stations you stored in memory.
To obtain good reception
To select stereo or monaural FM
When using overseas
MONO
U0.2 U0.1 E
Changing the sound quality
Set to “MONO” when there is noise during FM reception.
Sound becomes monaural, but noise is reduced.
Each time you press [FM MONO/ST]
The operation is the same as when playing CDs. (
➪
page 6)
To receive an FM broadcast clearly
Set to “CITY” if reception is poor or if there is interference from another
station.
Each time you press and hold [FM RECEPT %CITY/NOR]
CITY
No display
(canceled)
FM 0.2 MHz,
AM 10 kHz
(original setting)
FM 0.1 MHz,
AM 10 kHz
FM 0.05 MHz,
AM 9 kHz
No display
(stereo)
1
2
3
Listening to the Radio
M
FM TUNED
J
U0.2
1 Attaching the unit base.
R L
3 Placing the main unit on the unit base and connecting the
other cords.
Back of the speakers
To [DC IN]
Silver plug
Insert into
notch.
Listening through the speakers
ONLY
SL-J610V
Insert until you
hear it click into
place.
Grey cord
To [SP IN]
4 Press [OPR] to turn the speakers on.
OPR
OFF
ON
≥
The rechargeable batteries are also recharged in the unit base while the unit is off.
≥
Pressing [OPR] to turn off the speaker does not turn the main unit off. Press
[∫ OPR OFF] on the main unit (twice when playing a CD) to turn the main unit off.
≥These speakers do not have magnetic shielding. Keep them away from
televisions, computers, and other items easily affected by magnetism.
Operations are the same using or not using the unit base and speakers.
Front side of the right speaker
Unit base
Place speaker with
the cords on the
left side.
Insert grey cord
last.
Gold plug
Silver plug
Gold plug
Bottom of the speakers
To
[Ë] To
[DC IN]
Household
AC outlet
Keep cord clear.
RQT7588
2 Fitting cords into place on bottom of the unit base, and
connecting the grey cord to [SP IN].