Filter
Top Products
4
Skip play
The disc plays from the selected track through to the
last track, then play stops automatically.
Preparation: Put unit in stop mode.
1 Select the desired track.
2
Changing the sound quality
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS>TRAIN>LIVE>Cancel (no indicator is shown)
^------------------------------------------------}
S-XBS:
Select this setting to boost the low-range response.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your headphones/earphones while rid-
ing on the train, or to reduce fatigue when listening for a
long period of time.
LIVE:
Select this setting for a live concert effect.
Note!
The setting is returns to S-XBS when you disconnect
the power source.
Other Play Methods
The letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section.
Repeat play/Random play
Press during play or stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)(----------------]
One track is repeated. |
v|
All-track repeat (`) |
All the tracks on the disc are repeated. |
v |
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v |
Random repeat (RANDOM `) |
The tracks play repeatedly in random |
order. |
v |
Cancel (no indicator is shown)
--------------}
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1
`
M)(------------]
One track is repeated. |
v|
Memory repeat (
`
M) |
The programmed tracks are repeated. |
v |
Cancel (
M) -------------------------------------------}
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
≥The resume function does not work when random or
random repeat are on.
≥The mode is canceled when you disconnect the power
source.
E
F
Location of Controls
O
P
E
N
O
P
E
N
V
O
L
U
M
E
O
P
E
N
O
P
E
N
H
O
P
E
N
VOLUME
M
EM
ORY
MODE
E
Q
C
F
G
E
DB
A
H
O
LD
V
O
L
U
M
E
M
E
M
O
R
Y
IJ
KL
H
O
L
D
MODE
EQ
M
N
B
EQ
Back panel of the unit
C
MODE
A Open switch (OPEN)
B EQ button (EQ)
C Mode button (MODE)
D Display
E Skip/search buttons (:, 9)
F Play/pause button (1/;)
G Stop/operation off button (∫)
H Rechargeable battery cover
I Headphone jack (Ë)
J Memory/recall button (MEMORY)
K Headphone volume control buttons (j, i, VOLUME)
L Hold switch (HOLD)
M DC IN jack (KDC IN 4.5 V )
N Battery case terminals (EXT BATT)
Program play
Up to 24 tracks can be entered in the program.
Preparation: Put unit in stop mode.
1 Select the desired track.
2 Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
3 Repeat steps 1 and 2 to program all
the desired tracks.
4
∫ To program the same track in the se-
quence more than once
After step 2, press [MEMORY] desired number of times.
∫ If “'” is displayed
No more tracks can be programmed.
∫ To confirm the contents of the program
Press [MEMORY] while the disc is playing. (The num-
bers of the programmed tracks appear on the display in
sequence.)
∫ To delete the entire program
Press [∫].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
E
MEMORY
J
F
Side panel of the unit