Filter
Top Products
5
Skip play
The disc plays from the selected track through to the
last track, then play stops automatically.
Preparation: Put unit in stop mode.
1 Select the desired track.
2
Other Play Methods
The letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section (See page 2.).
Program play
Up to 24 tracks can be entered in the program.
Preparation: Put unit in stop mode.
1 Select the desired track.
2 Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
3 Repeat steps 1 and 2 to program all
the desired tracks.
4
∫ To program the same track in the se-
quence more than once
After step 2, press [MEMORY/RECALL] the desired
number of times.
∫ If “'” is displayed
No more tracks may be programmed.
∫ To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing.
(The numbers of the programmed tracks appear on the
display in sequence.)
∫ To delete the entire program
Press [∫, OPR OFF].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
B
6
:
5
9
E
1 ;
B
6
:
5
9
A
MEMORY/RECALL
E
1 ;
Anti-Skip System
This system deals with skipping in a variety
of ways:
≥The thinner and lighter construction makes the unit
less susceptible to vibration.
≥An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
≥The 40-second anti-skip memory fills in interruptions
caused by bumps and vibrations.
The anti-skip system works automatically while the
unit is on and cannot be canceled.
When bumps continue repeatedly
The message “SORRY” appears on the display and
sound is interrupted.
Note!
The anti-skip memory compresses digital signals.
SORRY
VOL
ALL
RANDOM
LIVE
XBS
TRAIN
-
M
1
S
Repeat play/Random play
Press during play or stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)(----------------]
One track is repeated. |
v|
All-track repeat (`) |
All the tracks on the disc are repeated. |
v |
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v |
Random repeat (` RANDOM) |
The tracks play repeatedly in random |
order. |
v |
Cancel (no indicator is shown)
--------------}
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1
`
M)(------------]
One track is repeated. |
v|
Memory repeat (
`
M) |
The programmed tracks are repeated. |
v |
Cancel (
M) -------------------------------------------}
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
F
MODE
RQT5656
Changing the sound quality
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS>TRAIN>LIVE>Cancel (no indicator is shown)
^------------------------------------------------}
S-XBS:
Select this setting to boost the low-range response.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your earphones while riding on the train,
or to reduce fatigue when listening for a long period of
time.
LIVE:
Select this setting for a live concert effect.
EQ
G