Filter
Top Products
54
Specifications
[GENERAL]
indicates safety information.
Power supply:
AC (100-240) V, 50/60 Hz
DC 12V, 6.6 A
Power consumption:
69 W (main unit only)
97 W (when AJ-YA120AG, AJ-YAD120AG are
installed)
Ambient operating temperature:
41°F to 104°F (5°C to 40°C)
Ambient operating humidity:
10% to 80% (no condensation)
Weight:
17.38 lb (7.9 kg)
Dimensions (WkHkD):
8
7
/16k5
1
/4k16
7
/8 inches (214k132k428 mm)
Recording format
21, 22
:
DVCPRO HD-LP
Recording video signals
21, 22
:
1080i/59.94 Hz, 720p/59.94 Hz, 1080i/50 Hz
switchable
Recording audio signals
21
:
48 kHz, 16 bits, 8 channels
Recording tracks
21
:
ODigital video/audio: Helical track
OTime code: Helical track (sub code area)
OCue signal: 1 track
OControl (CTL) signal: 1 track
Playback formats:
DVCPRO HD-LP, DVCPRO HD, DVCPRO50,
DVCPRO P, DVCPRO, DV-SP, DVCAM
Tape speed:
67.64 mm/sec. (in 59.94 Hz mode)
67.70 mm/sec. (in 60/50 Hz mode)
Recording time:
92 min. (when using AJ-HP92ELG)
Tapes used:
Metal tapes
FF/REW time:
Approx. 2 min. (when using AJ-HP92ELG)
[VIDEO]
$ Digital video
Sampling frequency
Y: 74.25 MHz
PB/PR: 37.125 MHz
Quantizing:
8 bits
Video compression system:
DCT + variable length code
Video compression ratio:
1:6.7
Error correction:
Reed-Solomon product code
Video recording bit rate:
100 Mbps
$ Video input connectors
21
HD serial digital input:
BNC k1
(compliant with SMPTE 292M/296M/299M
standards)
Reference input:
Black burst/HD tri-level sync automatic switching
BNC k2 (loop-through k1)
75Ω termination ON/OFF switchable
$ Video output connectors
HD serial digital output
21
:
BNC k2
(compliant with SMPTE 292M/296M/299M
standards)
(information superimposing ON/OFF)
SD serial digital output
21
:
BNC k1 (compliant with SMPTE 259M-C/272M-
A, ITU-R BT.656-4 standards)
(information superimposing ON/OFF)
Analog composite output:
BNC k2
VIDEO1
23
, VIDEO2
(information superimposing ON/OFF)
HD analog component output:
BNC k3
23
(Y/PB/PR, R/G/B switchable)
(information superimposing ON/OFF)
21: This functions only when the AJ-YA120AG (optional
accessory) is installed.
22: This functions only when the AJ-YAD120AG (optional
accessory) is installed.
23: The VIDEO1 and HD analog component Y outputs are
switched.