Filter
Top Products
CQ-C300U
16
Cautions
• This unit does not support 8 cm {3"} discs.
• Do not insert a disc when
indicator lights
because a disc is already loaded.
• Do not use irregularly shaped discs. ( page 28)
• Do not use discs that have a seal or label attached.
• To avoid damaging the face plate, do not push it down or
place objects on it while it is open.
• Do not pinch your finger or hand in the face plate.
• Do not insert foreign matter into the disc slots.
• Refer to the section on “Notes on CD/CD Media (CD-ROM,
CD-R, CD-RW)” ( page 28).
• A disc which has both CD-DA data and MP3/WMA data on it
may not be reproduced normally.
CD Player
When a disc is already loaded, press [SOURCE] to
select the CD mode.
1
Press [OPEN] to open the face plate.
2
Load a disc with the printed side facing
up.
Note: It may take some time to start playing.
Operation Flow
Track number Time
Play Mode indicators
Lights when each mode is
activated.
Random play
Repeat play
Lights when the disc is loaded.
CD Mode Display
4
Select a desired portion.
Track Selection
[] (TRACK): Next track
[] (TRACK): Preceding track (press twice)
Note: Hold down for fast forward/reverse.
Pause
Press [].
Press again to cancel.
3
Close the face plate manually.
Notes:
• The unit recognizes the disc and starts playing
automatically.
• The power will be turned on automatically when a disc
is loaded.
Disc Eject
1
Press
[OPEN].
2
Press
[] and take the disc out.
3
Close the face plate manually.
[] (Eject)
Printed side