12
Basic Operation
Basic Playback
Step 1 - Press the POWER
switch, the player will start.
The logo is appers on TV
screen.
Step 3 - Press the PLAY button
on the front panel or remote control.
The player will automatically read
and identify the disc and begin
playback.
Step 2 - Press OPEN/CLOSE button either on
front panel or remote control. When the tray is
open, place the disc on the tray with the label
side up. Press OPEN/CLOSE again to Close
the disc tray.
Preparation before playing:
1. Connect your DVD player to the TV and amplifier.
2. Turn on the TV.
3. Set the TV to the AV input connected to the DVD player
4. Turn down the volume on your amplifier, and then power it on.
5. Set the amplifier to the AV input connected to the DVD player.