Filter
Top Products
9
NOITULOSMELBORP
POSSIBLE CAUSE
GENERAL
No sound is heard.
Power is not on.
VOLUME Control is set
to minimum.
Slide the FUNCTION Selector.
Adjust the VOLUME
Control.
RADIO
Station has not been
tuned properly.
FM reception is weak.
Wrong function is
selected.
Slide the FUNCTION
selector to the radio
position.
No sound is heard.
Tune station properly.
Extend the FM antenna.
TROUBLESHOOTING GUIDE
SPECIFICATION
iPod does not
Power Requirement: AC ~ 120V 60Hz
Batteries: DC12V (1.5V x 8 “C” size, UM-2 batteries)
Frequency Range: FM 88 - 108 MHz
AM 530 - 1710 KHz
Power Consumption: 18W
dock properly
Using no or wrong iPod insert. Make sure the dock insert is the
proper fit for your iPod.
iPod didn’t install properly . Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod . Then reseat it in the dock.
iPod does not
respond to the
unit
iPod is not installed properly. Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod . Then reseat it in the dock.
doPi ruoy erus ekam esaelP.pu dekcol si doPi is
working properly before docking into
the unit. Please refer to your iPod
manual for details.
iPod didn’ t
charge up
iPod is not installed properly . Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod . Then reseat it in the dock.