Filter
Top Products
48
Customizing the Function Settings
Video Setup
Sharpness
The sharpness of the television picture can be set to
High, Mid or Low. The default is Low.
Brightness
The picture brightness can be adjusted as follows. Select
Brightness and press the right arrow button. This will display
a bargraph that indicates the brightness setting.
Use the left and right arrows to adjust the brightness level. It
can be set to + or - 20. The default is 0.
Contrast
The picture contrast can be adjusted as follows. Select
Contrast and press the right arrow button. This will display a
bargraph that indicates the contrast setting.
Use the left and right arrows to adjust the contrast level. It
can be set to + or - 16. The default is 0.
Press the ENTER button to return to the Video Setup
Page.
47
Dolby Digital Setup
The Dolby Digital options allow you to choose the way
the stereo signal is mixed.
Dual Mono
The audio out description of these selections is shown in
the table on the next page. The default is Stereo.
MODE LEFT SPEAKER RIGHT SPEAKER
STEREO STEREO-L STEREO-R
L-MONO L-MONO L-MONO
R-MONO R-MONO R-MONO
MIX-MONO L-MONO + R-MONO L-MONO + R-MONO
Dynamic
This function allows you to alter the dynamic range
compression of the sound output. High volume outputs
(gunfire, explosions) are softened enabling you to watch
your favourite movie without disturbing others.
The default is Full.
Customizing the Function Settings
Preference
Video
Dolby
Audio
General
-- Video Setup Page --
Sharpness Low
Brightness 00
Contrast 00
Go To Video Setup Page
High
Mid
Low
Brightness 0
Contrast 0