Filter
Top Products
alarm time.
TO WAKE TO BUZZER
Step 1 Follow step 1 to step 3 under “TO WAKE TO RADIO”.
Step 2 Rotate the VOLUME/BUZZER switch to the “BUZZER”
position. You will be awakened at the pre-selected alarm time by the buzzer tone.
To turn the Buzzer off, slide the AUTO/OFF/ON switch to the “OFF”
position or press ALARM SET/OFF Button.
ALARM OFF
Slide the AUTO/OFF/ON switch to “OFF” position if you wish to turn off the radio or
buzzer after the radio or buzzer has sounded in the Wake to Radio or Wake to Buzzer
operation. The alarm will not sound again until the next day unless you switch back to
“AUTO” position or use alarm button to shut off alarm, then the radio or buzzer will
automatically sound again in 24 hours at the same alarm setting.
SLEEP CONTROL
Step 1 Turn the AUTO/OFF/ON switch on the “AUTO” or “OFF” position.
Step 2 Press the SLEEP button to display the sleep time. The display will indicate 59
minutes. If you wish the radio to play for a shorter period simply press the SLEEP button
together with the MINUTE button to set the desired time period, or if you wish to play
longer, press SLEEP button along with HOUR button top play for 1 hour and 59 minutes
(MAX).
Step 3 Press the SLEEP button. The radio will turn on automatically and will turn itself
off when the pre-set time has passed.
NOTE: The maximum sleep time is 1 hour and 59 minutes.
The radio will be switched off automatically when the sleep time expires. To turn the
radio off before expiration of sleeping time, simply press the “SNOOZE BUTTON”.
BATTERY BACK-UP
Your clock has a battery back up feature in case of power failure. A 9 volt battery (not
included) is required. You must put in a battery to ensure the battery back up feature is
ready in case of power failure. If power fails, the back up battery will automatically
continue operation of the clock and maintain actual time. However, the display will not
be lighted. During actual power failure the alarm function will not be operational. When
electrical power is restored, the display will light up again and alarm time set previously
is restored. The battery will maintain timekeeping for approximately 8 hours during
power failure or interruption.
NOTE: Remove the battery if the clock is to be unplugged for a long time avoid
unnecessary battery drain.