Filter
Top Products
4
GB
HOW TO USE THE PROJECTION
At night-time the projection makes it easy to read the time and the
alarm on/off status.
1. Slide the [LOCK] slide switch to expose the projection lens.
2. Press [SNOOZE/
] to turn on the projection for 5 seconds.
The current time in digital format (as shown in the analog clock
display) will be projected onto the surface that the lens is fac-
ing. The alarm-on Indicator [
] will also be projected if the
Alarm is activated.
3. Adjust the projected image using the [FOCUS] knob.
For continuous projection, plug in the included 7.5 volt DC adaptor.
When the power adapter is connected to the unit, the clock
projection will be activated. To keep the clock projection activated
press and hold [SNOOZE/
] for 2 seconds. To deactivate the
feature, press and hold the snooze button for 2 seconds again or
simply remove the power adapter.
DC 7.5V
DC 7.5V
Note: Remember to leave the projection lens uncovered when the
continuous projection function is being activated.
When you are not using the clock projection feature, slide the
[LOCK] switch close in order to protect the lens and lock the keys.
SECTION 2
THE CALENDAR CLOCK
DEFAULT ANALOG CLOCK DISPLAY
You can select the local time or home time(the radio-controlled
time) as the default analog clock display by using [SWAP] switch
hidden inside the battery compartment.When the local time is
selected or shown, the
icon will be displayed.
DIGITAL DISPLAY MODES
Press [MODE] to display the following in sequence:
• Radio-Controlled Clock Time (same as the default analog clock
display) or Local Time.
• Day of the week
• Calendar (Month: Day or Day: Month format)
• 2nd time-zone (Local or home time)