Filter
Top Products
12
EN
FOCUS IMAGE
The FOCUS switch is located on the back of the unit.
Rotate to adjust.
CONTINUOUS PROJECTION
The AC power adapter must be plugged in to use this
feature ( 6).
1. Press and hold SNOOZE/LIGHT for 2 seconds
when the projection is on. When activated, the time
and alarm status will project continuously.
2. Press and hold SNOOZE/LIGHT for 2 seconds
again to deactivate.
RESET SYSTEM
The RESET button is located in the battery compartment.
Press it with the tip of a blunt object (such as a ball point
pen) whenever you change the batteries, or whenever
performance is not behaving as expected (e.g., unable to
establish radio frequency link with automatic clock, etc.)
This will return all settings to default value (barometric
pressure history, alarm setting, etc.)
SAFETY AND CARE
Wash the unit with a slightly damp cloth and mild detergent.
Avoid dropping the unit or placing it in a high-traffic
location.
WARNINGS
This product is designed to give you years of service if
handled properly. Observe the following guidelines: