Filter
Top Products
EN
8
ICON DESCRIPTION
Sunny
Partially cloudy
Cloudy
Rainy
Snowy
TEMPERATURE AND HUMIDITY
To toggle temperature unit:
Press °C / °F on the main unit.
To select sensor displayed
:
1. Press
MODE / SNOOZE to select Weather area.
2. Rotate MODE / SNOOZE
. indicates the sensor
number currently displayed.
NOTE
indicates indoor temperature and humidity
is displayed.
To activate auto-scan between sensors
:
1. Press
MODE / SNOOZE to select Weather area.
2. Press and hold MODE / SNOOZE for 2 seconds.
Each sensor’s data will be displayed for 3 seconds.
3. To deactivate auto-scan press MEMORY/
ON /
OFF or rotate MODE / SNOOZE.
NOTE If you select a sensor that collects only
temperature data, humidity information will not be
shown.
MAXIMUM / MINIMUM RECORDS
1. Press MODE / SNOOZE to select Weather area.
2. Press MEMORY /
ON / OFF to toggle maxmum
/ minimum and current settings for the sensor
selected.
To clear maximum and minimum records press and hold
MEMORY /
ON / OFF for 2 seconds.
BACKLIGHT
Press MODE / SNOOZE to activate the backlight for 8
seconds.
RESET
To return the main unit to the default settings use a thin
blunt object such as a ballpoint pen to press RESET.
To reset the sensor press
RESET in the battery
compartment.
PRECAUTIONS
This product is engineered to give you years of
satisfactory service if you handle it carefully. Here are
a few precautions:
• Do not cover the ventilation holes. Make sure items
that are nearby such as newspapers, tablcloths,
curtains etc cannot accidentally cover the ventilation
holes.
• Do not subject the unit to excessive force, shock,
BAR383HG_M_EN_R9.indd 8 4/12/06 5:24:17 PM